Nest thermostat compatibility

  • Google Nest thermostats are intentional to work with most 24 V systems, eve older systems. They shape with all common fuel types including natural gas, oil color, and electricity.
  • During setup, the Google Home Oregon Nest app will guide you through steps to tell you if your system is miscible with your Nest thermostat before you put in it. The app will also give you a custom wiring guide for your thermostat.
  • You can also check up on your system's compatibility before buying a Nest thermostat with our online Compatibility Checker.
  • Some systems may require a common wire (C wire) or the Nest Power Connective. Go to g.co/nest/cwire for details.

Use the Compatibility Checker

The online Compatibility Checker has full instruction manual to tab if your heating and cooling systems are compatible with Nestle thermostats, simply here is just about additional information to help you as you wont information technology:

How to turn your system's power off

This protects you and avoids blowing a fuse in your equipment.

There may be a turn on your arrangement or virtually your system that looks like a regular light switch. If your system doesn't undergo a switch, turn inactive exponent to that at the surf or fuse box.

Turn off power through breaker box or switch

How to test that system of rules might is off

Change the temperature happening your thermostat past at least 5 degrees.

  • If it's wintertime, turn upwardly the temperature to turn on heating.
  • If IT's summertime and you have system cooling, turn down the temperature.
  • Wait at to the lowest degree 5 minutes to check if your system turns on (you'll need to hold because many systems have a intrinsical delay).

Tip: You can listen in for your organisation to crook on, or put your paw near a vent to feel if there's warm or cool air that comes through.

How to remove your thermostat's cover

Some covers simply pull soured, while others need to be unscrewed.

If you have an older thermostat, there English hawthorn represent a middle-scale that too needs to be removed to expose the wires.

Learn about thermostat mid-plates

Remove thermostat cover

Incompatible thermostat wires

If your thermostat's wires are spiky voltage operating room stranded, then your arrangement isn't compatible. But, it's viable that a toilet-trained professional can make your system compatible.

Stranded wires

Attend closely at the end of one of the thermostat wires. You may motivation to pull one and only impermissible of the connector to check. If at that place is more than united large-scale strand, the wiring isn't Nestle-compatible. When you're done, reinsert it into the castigate connective.

Bank bill: If your wires are stranded, you may comprise able to contact a local pro to cap, solder or replace stranded wires with a worthy heart and soul wire, which will work with the Nest thermoregulator. The method acting may hinge on your local electrical code requirements.

Stranded wires

High voltage wires

High voltage systems typically have a thermostat that is labeled 120 V or 240 V, and has two thick wires with conducting wire around the bend. High voltage systems, such equally exciting baseboard heaters, aren't compatible with Nest thermostats.

In some cases, it's latent that your system can be made Nest thermostat-compatible. Contact a local pro and have them establis a leave office transformer to 20 - 30 V.

high voltage text

high voltage wire nut

Bring out a picture of the wires

Save a fancy of your current thermostat's wires in case you need help later. Make a point that the connector labels are readable.

Identify thermostat wires

Phone taking a picture of thermostat wires

If your thermostat's connectors have cardinal labels

It can be hard to determine which lay out of labels to use in the compatibility checker. Mention to the following clause for more information:

What to do if your thermostat's wire connectors have ii labels

Thermostat labels

Ignore the wire colours

Simply recruit which connectors have a wire and ignore the color of the wires. This is because not all systems are wired to the thermoregulator with the same conducting wire colours.

E.g., assume't enter R in the Compatibility Checker if you find a bolshy wire, OR W if you find a Patrick White wire. The label along the wire connector is what you should enter. So check R if in that location's a telegram of any color in your thermostat's R connector.

Don't figure jumper wires

If your thermostat has a short "jumper" wire between cardinal connectors, don't include that wire. Only enter the labels for wires coming from privileged your wall that are attached to the thermostat. For instance, in the representative connected the right, you would only enter Rh, Y1, G and C wires into the chequer. You would not enter Rc in the checker, because it is only wired by a jumper.

Nest thermostat wires from wall

Hear more than about compatibility

Systems that are Nest-compatible

At that place are some key differences between Nest thermostats and what systems will mould with each.

Note: Use this mesa for reference only.

System types

Nest Learning Thermostat

Nest Thermostat E

Draw close Thermostat
Wake solitary, fashionable only, or heat pump systems

check mark icon

check mark icon

check mark icon

C wire or Nest Magnate Connector required

Natural Gas, Oil, or Electrical fuel types

check mark icon

check mark icon

check mark icon

Single present heating and/or chilling

check mark icon

check mark icon

check mark icon

Heat only Oregon cold simply C wire or Nest Power Connector requisite

Single stage heating with cardinal stages of cooling

check mark icon

check mark icon

check mark icon

Two stages of heating with cardinal stage of chilling

check mark icon

check mark icon

check mark icon

Concentrated stage heat pump with Oregon without AUX heat

check mark icon

check mark icon

check mark icon

C wire or Nest Power Connector required

Single speeding fan

check mark icon

check mark icon

check mark icon

Single stage estrus pump with separate man-to-man stage furnace heating (Dual fuel)1

check mark icon

check mark icon

check mark icon

C wire surgery Nest Power Connexion required

Only stage heat pump with separate two stage furnace heating (Double fire)1

check mark icon

Two stage heat ticker with or without AUX heat

check mark icon

Two stage heat pump with segregated 2 stage furnace heat (Treble fuel)1, 2

check mark icon

Humidifier* operating theatre dehumidifier1, 2

check mark icon

Dual transformer systems1, 2

check mark icon

Two stages of cooling and two operating theatre triad stage furnace heating 2

check mark icon

Two or three speed sports fan1, 2

check mark icon

PTAC systems2

check mark icon

1Your system requires high configuration and wiring. If you make uncomparable of these systems, contact a local pro.

Important: Professional installation is advisable for some systems since their wiring and setup seat embody complicated. These admit:

  • Three-fold fuel systems (heat pump with furnace)
  • Dual transformer systems (Systems that have to a greater extent than one R cable)
  • Entire-abode humidifiers and dehumidifiers (compatible with Nest Learning Thermoregulator only)

2 Nest thermoregulator can only support unmatched of these systems at a time.

About the C wire

The common (C) cable doesn't control heating or cooling. Alternatively, C wires help turn in power from the system to the thermoregulator in slip the other wires can't allow enough power. Not all systems have a C wire installed, but Nest thermostats were engineered to use arsenic little power atomic number 3 possible for their display and internal circuitry. So in many cases, they don't necessitate a C wire.

But if you find that you need a C wire with a Nest thermostat, you can install the Cuddle Power Connective. Or you can liaison a local pro to install the power connector or run a C electrify for you. Costs can buoy vary depending connected how difficult it is to route a new cable done your walls.

When the Nest thermoregulator necessarily a C wire

Compatibility with zoned systems

Nest thermostats are compatible with zoned systems, including zoned systems with dampers. However, there are many zoned systems that require a C wire to work with a Cuddle thermostat.

How the Nest thermostat works with zoned systems

Or so the Nest thermostat's star connector

Snuggle thermostats likewise possess a star connexion * that offers you some flexibility to install specialized systems.

The Nest Acquisition Thermostat's * connector lets you install a humidifier, a dehumidifier, emergency heat, multiple fan speeds, or a 3rd stage of warming.

The Nest Thermostat E's * or OB connector lets you install a heating pump, a second stage of heating, or a second represent of cooling.

Instruct Sir Thomas More about the star connecter

Nest thermostat star connector

Systems that are incompatible with Nest thermostats

While most 24 V heating and cooling systems are compatible with Nest thermostats, there are some systems that aren't mixable. You can chop-chop narrate if you have one of these systems without having to use the Compatibility Checker or to look at your thermoregulator's wiring.

If you have one of the system types below, it North Korean won't work with a Nest thermoregulator.

Proprietary systems

  • If you retrieve wires in your thermostat's connector that have not-standard labels (for instance 1,2,3, OR A, B, C), your system is branded.
  • If your system only if has two wires, but you have both heat and cooling, your organisation is likely copyrighted.

Trademarked systems aren't compatible with Google Nest thermostats. However, some proprietary systems can glucinium rewired by a pro installer to constitute compatible.

Proprietary wires

Millivolt heaters

  • Millivolt systems are typically fence in heaters OR floor heaters and use electricity operating room normal gas. These systems use much less electrical energy than low pressure voltage systems and can't deliver the right-minded amount of power to Nest thermostats.
Picture of a floor furnace and wall-mounted furnace

High voltage systems

  • Broad voltage systems are usually electric car baseboard warming systems or other radiant systems powered by electricity.
  • Tenor voltage thermostats are much well-stacked into the fence in and typically have two to four thick wires coming out of the thermostat. Conducting wire nuts are oft used to connect the thermostat to the system wires.
  • High-pitched voltage thermostats are usually labeled 110, 115, 120 or 240 VAC.Observe: In some cases, it is possible to reach a postgraduate voltage organization Nest-well-matched. Contact a localized pro and have them install a step down transformer to 20 - 30 V.
  • High voltage thermostats should only be installed Beaver State uninstalled by a professed referable the high voltage that they carry.

high voltage text

high voltage wire nut

Undiversified fire systems

  • Systems that use coal, wood chips, pellets, anthracite, or other biomass materials are typically incompatible with Nest thermostats.
Solid fuel system

Wired remote sensors

Remote sensing element wires are typically utilised to give your thermostat outside weather data. These wires can't be connected to Nest thermostats. But Nest thermostats get into't need pumped up sensors since they get weather information o'er Wi-Fi. Even if your organization has sensor wires, it may yet comprise Draw close-compatible.

Some little-controller based systems

Systems that use small-controllers instead of relay race are sometimes more sensitive to ability sharing. If you receive a micro-controller based system, your Nest thermostat may need a C wire to be compatible with these systems.

Systems that can't deliver enough mogul

Some systems can't deliver plenty power (at least 20 volts) o'er the existing system wires, so a Nest thermoregulator's battery May slowly drain and eventually cause the thermostat to reverse away. These systems are sometimes called high impedance systems. You may cost able to install a C wire to make your scheme compatible with a Nest thermoregulator. Contact a topical professional.

Some organisation computer hardware such as gas valves and zone or relay panels require a C electrify to work with Nest thermostats. If you would like to find out more information or so installing a C wire, contact a local pro.

Gas valves

Some flatulency valves on systems vibrate or buzz when a Snuggle thermoregulator is installed. This can usually beryllium fixed away connecting a C wire.

Zone electrical relay or control panels

Some systems have control panels or equipment interface modules that require a C cable to be congenial with Nest thermostats. Infra is a inclination of some known panels that require a C wire. This list is not meant to be comprehensive, so your system may be incompatible even if it isn't listed here.

  • Beutler ZTE2S
  • Bryant 548F036
  • Immune carrier HK42FZ011
  • Honeywell AQ25110B
  • Honeywell EMM-3
  • Honeywell HZ221
  • Honeywell HZ311
  • Honeywell HZ322
  • Honeywell HZ462
  • Honeywell Trol A Temp MABS EZ
  • Honeywell TZ-4
  • Lennox LZP-2
  • Nordyne 624631-A
  • Nordyne 903915A
  • Villara ZTE2S
  • Waterfurnace ATV045A 110CIT
  • White-Rogers 36C03-300
  • ZoneX DigiTract 4
  • Ztech ZTE2S

Incompatible system wiring

Too many stages of cooling system operating theater heating

  • Nest Learning Thermostats are only compatible with systems that have one or two stages of cooling.
  • The Nest Thermostat E is only when compatible with one stage of heating, one present of cooling, and an additional stage of either warming surgery cooling.

Worldwide systems

  • Some world-wide systems, so much as Buderus boilers, have dry contacts or other discrepant wiring. These systems may require electrical relay panels ready to be installed with standard American thermostat wiring.

Heat pumps with L wires

  • L wires are typically accustomed show system status, like emergency estrus being connected. Nest thermostats fundament work with systems that use Service Light-footed (L) wires. While L wires hind end't glucinium connected to the Nest thermostat, they don't need them. The Nest thermostat and Nest app will show you system status information without connecting L wires.

Get in favour of installation for a plural fuel system

A dual fuel heating and cooling system (also named a hybrid or packaged system) is a combination of a heat heart for primary heat and cooling, and a furnace (ordinarily gas or oil) that provides a second and/or third stage of heating.

The Nest thermostat is compatible with these systems and supports up to 2 alternate heat sources.

You have a dual fuel system if you suffer a furnace inside of your home, and a heat pump on the outside of your habitation. Wake pumps look kindred to air conditioners, so check the tag on your outdoor building block to make a point it's a heat pump. If you're calm down not sure which system you have, impinging a local pro.

If you have a multiple fuel system, you volition penury to have a trained professional set up your thermoregulator. It's important for a professional to assess the requirements for your specific dual fuel conformation since choosing incorrect options for a dual fuel scheme can result in damage to your arrangement. Contact a local pro.

Thermoregulator wire labels

If you demand to know more about what the labels on your thermostat wires mean, refer to the following article for more information.

Thermoregulator wire labels

Was this adjuvant?

How can we improve IT?